What tolerances can be held?

General tolerances depend on material, geometry, process, and inspection method. Critical dimensions should be marked clearly on the drawing for review.

Can this part be adjusted for a different material?

Yes. The same geometry can usually be reviewed for aluminum, stainless steel, brass, engineering plastics, or other production materials depending on strength, weight, and cost targets.

Can the surface finish be changed?

Yes. Common options include as-machined, bead blasting, anodizing, plating, polishing, passivation, and powder coating where compatible with the material.

Can parts be packed for assembly-line use?

Yes. Parts can be separated, labeled, protected from surface damage, and packed in batches to support incoming inspection or line-side assembly.

Is inspection documentation available?

Inspection data can be prepared for key dimensions, threaded features, flatness, cosmetic requirements, or other critical characteristics listed on the drawing.

Can you help simplify the design for manufacturing?

Yes. Design-for-manufacturing feedback can cover corner radii, tool access, wall thickness, fastening strategy, and finish constraints before production starts.

Do you support both prototype and low-volume production?

Yes. Prototype quantities can be produced first, then the same drawing package can be prepared for repeat low-volume orders after validation.

What files are helpful for quoting?

A 3D CAD file such as STEP or IGES is preferred. A 2D drawing with tolerances, material, finish, and inspection notes helps avoid assumptions.

Can threaded inserts or hardware be added?

Secondary operations such as threaded inserts, helicoils, PEM hardware, bushings, and simple assembly can be reviewed as part of the production plan.

Are the gallery photos exact production samples?

The gallery images are test media from the existing library and are used as visual placeholders. Final production appearance follows the confirmed drawing and finish requirements.

Omah
Produk
Rincian Produk

Rincian Produk

Penyangga Pemasangan Girbok Robotik

Braket panganceng kothak gir sing kaku kanggo sendi robotik, piranti tes, lan modul drivetrain otomasi.

Braket kothak gigi nyedhiyakake antarmuka sing stabil antarane motor, reduktor, lan komponen rangka, nalika njaga akses perakitan tetep cetha.

Fitur-fitur utama

Iga penguat kanggo kekakuan drivetrain
Fitur panyelarasan tengah poros sing akurat
Rongga sing diolah kanggo jarak kabel lan pengikat

Aplikasi sing disaranake

Digunakake ing lengan robot, modul panggerak AGV, sel otomasi, lan rig prototipe fungsional.

Cathetan Teknis

Bahan	Aluminium utawa baja
Proses	Pemborongan CNC
Rampung	Anodisasi utawa pelapisan seng
Jenis pesenan	Produksi pilot

Saben produk tes nggunakake aset perpustakaan media sing wis ana lan istilah taksonomi sing bisa digunakake maneh supaya cithakan dhaptar, arsip, lan rincian bisa dites nganggo konten terstruktur sing realistis.

Pitakon sing Asring Ditakoni babagan Kontainer Kustom

Qigao iku pamimpin mesin las lan mesin motong geni ing China. Kita tetep nyedhiyakake teknologi profesional, kinerja dhuwur, lan layanan sawise adol sing apik kanggo nyukupi kabutuhan pelanggan saka saindenging jagad. China Qigao bakal nyoba sing paling apik kanggo dadi panyedhiya siji panggonan kanggo sampeyan. Ucapna tugas rinci sampeyan lan kita bakal golek solusi bebarengan!

Toleransi apa sing bisa ditahan?

Toleransi umum gumantung marang bahan, geometri, proses, lan cara inspeksi. Dimensi kritis kudu ditandhani kanthi cetha ing gambar kanggo ditinjau.

Apa bisa nambah sisipan ulir utawa piranti keras?

Operasi sekunder kaya sisipan ulir, helicoils, piranti keras PEM, bushing, lan perakitan prasaja bisa ditinjau minangka bagéan saka rencana produksi.

Apa dokumen inspeksi kasedhiya?

Data inspeksi bisa disiapake kanggo dimensi kunci, fitur berulir, dataran, syarat kosmetik, utawa karakteristik kritis liyane sing kadhaptar ing gambar.

File apa waé sing migunani kanggo nyantumaké kutipan?

File CAD 3D kaya STEP utawa IGES luwih disenengi. Gambar 2D sing nyakup toleransi, bahan, rampung, lan cathetan inspeksi mbantu ngindhari asumsi.

Apa foto-foto ing galeri iku conto produksi sing sejati?

Gambar-gambar galeri iku media tes saka perpustakaan sing wis ana lan digunakake minangka penanda visual. Penampilan produksi pungkasan manut gambar sing wis disahake lan syarat-syarat finising.

Ngrembug kabutuhan produk sampeyan

Gunakake area ajakan tumindak iki kanggo pitakon produk, panyuwunan conto, utawa pangarahan konsultasi teknis.

Mesin cemilan kembung

Mesin jajanan goreng

Mesin beras diperkaya

Mesin remah roti

Mesin panganan kéwan piaraan

Pemesinan CNC kanggo Industri Dirgantara

E-buku Pemesinan CNC

Hubungi kita

Platform Kutipan Online v3.0

Penyangga Pemasangan Girbok Robotik

Fitur-fitur utama

Aplikasi sing disaranake

Cathetan Teknis

Pitakon sing Asring Ditakoni babagan Kontainer Kustom

Ngrembug kabutuhan produk sampeyan

Penyangga Pemasangan Girbok Robotik